Steps to Fix Dripping Faucets

It is quite undeniable that most of us face our kitchen faucets everyday as we wash our dishes or take a drink. We just can’t afford to waste so much drinking water every now and then because of our leaky taps. This plumbing problem may appear minor to us but this requires quick hands-on repair to avoid too much water wastage and high water bills. If you learn the basics of leaky faucet repair, it would be very easy for you to repair even the modern faucets we have. The repair may vary on the kind of kitchen faucet you installed. Here are some steps for a quick leaky tap restoration.

 

  • TURN OFF WATER SUPPLY

Look under your kitchen sinks to find handles that will turn off the water supply. Stopping the water from going up your faucet will avoid making your kitchen into a pacific ocean.

 

  • PLUG THE DRAIN

Kitchen faucet restoration involves screws and little parts. And dropping its little parts of the drain would absolutely ruin your day. It would be better to plug it up in the first place with drain stoppers of a clean rag.

 

  • KNOW THE TYPE OF FAUCET YOU HAVE

There are different kinds of kitchen faucets, and by knowing what kind of faucet you have, you will know its parts and functions. This will give you an idea of what part to check first for damage and loosened parts.

 

  • INSPECT YOUR FAUCET

Try to check your faucet for leaks and loose parts. Know first where the water is coming from before removing its pieces. Focus on the damaged parts to avoid destroying the other parts too. This will give you the idea of what part needs a replacement.

 

  • REPLACE DAMAGED PARTS

When you have figured out the parts that don’t function well and is the primary cause of your leaky tap, remove it and find a replacement. It would be better if you bring the part with you as you shop for new ones to find its exact measurement and size.

 

  • ASSEMBLE

Return the faucet to its original position by assembling its parts. Make sure to fasten the nuts and screws well to avoid leaks.

 

  • CHECK FOR POSSIBLE LEAKS

After assembling the parts, run your faucet to check for leakage and to know if there is a need for further repair. If leaks persist, try to check again for loose parts during the assembling process.